Free Delivery
✓ Sold
Plastic Parts Crystal Coating
39 AED
49 AED
Product Description
Plastic Parts Crystal Coating, which is an automotive restorer liquid used to revitalize faded, dull, or chalky interior and exterior vehicle plastics.
Product Overview
1. Purpose: Restores color, adds a protective layer, and delivers a clean shine to faded plastics.
2. Applicable Surfaces: Dashboards, door frames, door panels, pedals, and exterior trim like bumpers or side moldings.
3. Kit Inclusions: Typically includes one 30ml bottle of liquid restorer, an application sponge, and a microfiber towel.
Step-by-Step Application Instructions
To get the best results and ensure a long-lasting bond, follow these steps:
1. Thoroughly Clean the Surface: Wash the plastic parts with an all-purpose automotive cleaner. Remove all dust, grease, wax, and embedded dirt. Let the area dry completely before proceeding.
2. Apply the Liquid: Pour a few drops of the crystal coating liquid directly onto the soft black side of the included sponge applicator.
3. Wipe Evenly: Wipe the product evenly onto the target plastic surface using smooth, consistent strokes. A little goes a long way, so apply a thin, even coat.
4. Buff Excess Product: Let the product sit for 1 to 2 minutes so the plastic can absorb it. Then, use the clean microfiber cloth to gently buff the surface and remove any excess wet residue.
5. Let it Cure: Allow the coating to fully dry and cure. Avoid touching the area or exposing it to water or rain for at least 4 to 12 hours after application.
Product Overview
1. Purpose: Restores color, adds a protective layer, and delivers a clean shine to faded plastics.
2. Applicable Surfaces: Dashboards, door frames, door panels, pedals, and exterior trim like bumpers or side moldings.
3. Kit Inclusions: Typically includes one 30ml bottle of liquid restorer, an application sponge, and a microfiber towel.
Step-by-Step Application Instructions
To get the best results and ensure a long-lasting bond, follow these steps:
1. Thoroughly Clean the Surface: Wash the plastic parts with an all-purpose automotive cleaner. Remove all dust, grease, wax, and embedded dirt. Let the area dry completely before proceeding.
2. Apply the Liquid: Pour a few drops of the crystal coating liquid directly onto the soft black side of the included sponge applicator.
3. Wipe Evenly: Wipe the product evenly onto the target plastic surface using smooth, consistent strokes. A little goes a long way, so apply a thin, even coat.
4. Buff Excess Product: Let the product sit for 1 to 2 minutes so the plastic can absorb it. Then, use the clean microfiber cloth to gently buff the surface and remove any excess wet residue.
5. Let it Cure: Allow the coating to fully dry and cure. Avoid touching the area or exposing it to water or rain for at least 4 to 12 hours after application.
